The highest quality backyard putting green material available on the market today...

Our New Putting Green Technology revolutionized the old polypropylene fibers. Giving you the most realistic putting green surface on the market today. This technology reduces putting green installation time, and the old difficulties by better then half.

 

Pre-Bent Fibers - We start with an approximate 5/8" - 11/4" fiber and then we reduce it (pre-bend) to a 9/16" - 5/8" finished height by means of our new manufacturing process. This ensures you that the end results will be an actual well dressed putting green surface that does not require a seasoned installer.

Non-Directional Fibers will never lean one direction like the old technology. The leaning of the fibers in one direction will cause a huge speed difference depending on if you are putting against the grain, or with the grain. In the past, it has taken a tremendous amount of effort (labor and know-how) to eliminate this problem when using the old polypropylene straight fiber putting green material.

 

A Big Part Of This New Technology is how the yarn is stitched. Old technology uses a straight or curvy stitch. We use the new high tech machinery that weaves in a back and forth pattern, which eliminates the possibility of grooves (highs and lows) in the putting green surface.

Click Here For Putting Green By The Roll
All Putting Green Kits Include Cups and Flags.
Click On Photos		To See Sizes and Pricing (free shipping)
9/16" Polypropylene Pre-Bent Putting Green Surface * Display Price Is For Turf Only *		KIT INCLUDES - (1-ea) 9/16" Non-directional Polypropylene Putting Green Surface, (2-4 ea) practice putting green flags & (2-4 ea) Regulation in-ground cups. Rolls 9 -11 on the Stimp meter. MATERIAL: * 9/16" Pre-Bent Non-Directional Polypropylene * Turf Green * 2ply backing w/ 2coats of hot-butyl urethane * 36 oz * 12 foot wide roll.
1/2" Polypropylene Pre-Bent Putting Green Surface		KIT INCLUDES - (1-ea) Non-directional TARGET Polypropylene Putting Green Surface, (2-4 ea) practice putting green flags & (2-4 ea) Regulation in-ground cups. Rolls 8 -12 on the Stimp meter. MATERIAL: * 1/2" Pre-Bent Non-Directional Polypropylene * Two Tone Green Color * 2ply action backing w/ 2coats of hot-butyl urethane * 42 oz * 15 foot wide roll.
5/8" Polypropylene Pre-Bent Target Putting Green Surface		KIT INCLUDES - (1-ea)  Non-directional TARGET Polypropylene Putting Green Surface, (2-4 ea) practice putting green flags & (2-4 ea) Regulation in-ground cups. Rolls 8 -12 on the Stimp meter MATERIAL: * 5/8" Pre-Bent Non-Directional Polypropylene * Dark Turf Green Color * 2ply backing w/ 2coats of hot-butyl urethane * 40oz * 15 foot wide roll.
1/2" Nylon Putting Green Surface		KIT INCLUDES - (1-ea)  1/2" Nylon Putting Green Surface, (2-4) practice putting green flags & (2-4) Regulation in-ground cups. Rolls 10-12 on the Stimp meter. MATERIAL: * 1/2" Nylon * Turf Green Color * 48 oz * 15 foot wide roll.
3/8" Nylon Putting Green Surface w/5mm foam backing		KIT INCLUDES - (1-ea) 3/8" Nylon Putting Green Surface w/5mm foam backing, (2-4 ea) practice putting green flags & (2-4 ea) Regulation in-ground cups. Rolls 11-12 on the Stimp meter. MATERIAL: * 3/8" Nylon * Turf Green Color * 5 mm rubber foam backing * 38 oz * 12 foot wide roll.
1" True Second Cut Fringe		FRINGE Sand fill (1 to 2 lbs. Per sqft.) Our second cut fringe was developed so you can chip and putt off of it. Most of our competitors are selling a lawn grass that is similar to the rough - not a fringe.
Sample Instructions: Putting Green Installation		After rough cutting the fringe material, put it in place and  nailing down the outer edge (use galvanized 6" or 7" gutter spike). Lift up the putting green surface and place the fringe pieces under the putting green surface. Now you can use the putting green edge as a template to cut your fringe.  NOTE: Cut along the edge with a good sharp utility knife... Full instruction info. available to customers, as well as phone support.